Improving Swing Performance: JIT vs AOT Compilation
Linux native band plays fast
By: Vitaly Mikheev
Nov. 11, 2004 12:00 AM
The JFC/Swing API, natively precompiled on Linux for the first time, delivers measurable improvement in Java GUI performance.
The Excelsior Engineering Team has ported Excelsior JET, a Java Virtual Machine (JVM) with an ahead-of-time compiler, to the Linux/x86 platform. As the JET JVM supports the entire J2SE platform API including the Java Foundation Classes (JFC/Swing), Excelsior engineers had an opportunity to evaluate the response time of natively compiled JFC/Swing on Linux. The results of the comparison with conventional, dynamically optimizing JVMs were encouraging: response time has improved by 40% or even doubled on some benchmarks. What's more important is that real-world Swing applications performed perceivably faster.
This article describes Excelsior JET JVM and JFCMark, free benchmark software by Excelsior that measures Swing-based GUI performance. Moreover, the authors share their technical experience in optimizing JFC/Swing and argue why ahead-of-time Java compilation has advantages over dynamic compilation for certain application types.
Two Recipes for JavaThe definition of the term "virtual machine" has been revised in the past few years. Modern Java Virtual Machines are no longer just interpreters of the Java bytecode. High performance, state-of-the-art implementations are made up of optimizing compilers that translate bytecode instructions down to the native code that runs directly on the hardware. However, one technical decision distinguishes contemporary JVMs: what's the best time to run the performance engine, an optimizing native compiler? Two options exist: run it before or after the application starts.
Most JVMs initially interpret the program and then analyze how it runs by looking for hot spots, that is, frequently executed portions of bytecode. Hot spots are then compiled to optimized native code during program execution. This approach is called Just-In-Time (JIT) compilation. Other JVMs feature static native compilers similar to traditional C/C++ compilers, enabling developers to optimize their Java applications before execution. For Java, this old trick has a new name - Ahead-Of-Time (AOT) compilation. However, solely static compilation is not enough for Java compatibility. Remember that many Java applications use custom classloaders to load some components or plug-ins at runtime. To have the "J" in "JVM," such virtual machines must be supplied with an interpreter or JIT compiler to handle classes that could not be precompiled.
Either approach alone is not a silver bullet for Java performance. JIT-oriented JVMs can "see through" program execution, which may help them optimize hot code better than static compilers do. In return, AOT-oriented JVMs do not spend execution time on interpretation, profiling, and compilation, so optimized programs run fast from start-up. Not surprisingly, single-loop benchmarks fail to reveal a clear performance winner between the two approaches. Instead of carrying the "microbenchmark war" into the Linux camp, let's take a look at a vital example: the performance of Java GUI applications based on JFC/Swing.
Penguin-Driven JVMsBoth JIT and AOT-oriented implementations are available for Linux. The well-known Sun HotSpot Client and Server JVMs are powered by JIT compilers. BEA WebLogic JRockit and IBM Java 2 Runtime Environment also play in the JIT team. GCJ, the GNU compiler for Java, now supported by Red Hat, and Excelsior JET feature AOT compilation.
At the core of Excelsior JET is a static optimizing compiler that enables developers to transform their Java applications into native executables or shared libraries (.so) on a Linux flavor. The AOT compiler comes with a JET Control Panel (see Figure 1), a graphical front end that makes the product easy to learn and use. The command-line interface provides the integration of Excelsior JET into automated builds. The redistributable JET runtime system includes a JIT compiler to support Java dynamic classloading. Another graphical tool, JetPackII (see Figure 2), enables the rapid creation of installation packages for optimized applications. Excelsior JET supports all Java 2 platform packages up to version 1.4.2.
Another static Java compiler is GCJ, a member of the GNU Compiler Collection. Following the FSF philosophy, GCJ uses a clean-room, free implementation of the Java 2 Platform API. Although most packages are now supported, there are noticeable exceptions such as the Abstract Window Toolkit (AWT), Swing, and some of the APIs introduced to J2SE 1.4. Contributors to the GNU Classpath project are currently implementing the missing packages. The GNU Interpreter for Java complements GCJ to enable Java dynamic loading. The implementation of a JIT compiler is planned for the future.
Accelerated Swing TempoGUI response time is in the eye of the beholder. As a result, it's tough to obtain GUI performance scores. To address this problem, Excelsior has developed JFCMark, a free benchmark suite to measure the performance of the JFC/Swing API. The included tests are manipulating with frames, trees, and tables; switching look-and-feels; decoding and drawing images; displaying and scrolling HTML texts; and using Swing layout managers. JFCMark requires JVMs that support the Java 2 Platform at the level of J2SE 1.3, 1.4, or 1.5.
Each test performs its scenario in the main loop through a given number of iterations. This allows you to obtain performance scores in short- and long-running modes. Upon completion, these tests report performance measured in units specific to their specific scenarios, for instance, frames opened per second. When designing JFCMark, we paid close attention to benchmarking accuracy. For a particular configuration, every benchmark always performs the same number of operations independently of the JVM under test. This requirement is achieved through synchronous processing of Swing events, that is, a next event is sent only after the previous one is processed. Therefore, a possible difference in reported speed depends solely on the time of the benchmark execution.
Let's consider the performance of the Swing windowing system that provides operations with frames. We have used a part of JFCMark to test typical manipulations with frames such as opening/closing, dragging, and selecting. The testbed configuration was as follows.]
Figure 3 shows Swing performance scores for the long-playing version of JFCMark. For example, 600 frames are opened and closed by one of the tests. In this scenario, JIT-based JVMs have a chance to "warm up," that is, to optimize hot code for maximum speed. Note, however, that this level of performance may be reached only after doing a "good amount of mouse-clicking" in real-world Java GUI applications. Nevertheless, Excelsior JET still outperforms by 40% the first runner-up (HotSpot Client VM).
To see how Swing works on dynamic JVMs that have not been "warmed up" yet, look at Figure 4. It shows out-of-the-box performance scores for the short-running configuration. This case would correspond to the way Java GUI applications perform right after start-up. As can be seen, the JET-compiled Swing runs fast and it runs fast from the start. Other test participants work at least twice as slow for this scenario. Note that short-running benchmarks are mostly important for the client-side application's performance. For instance, if you start a GUI application and drag something with the mouse, you don't want to see it stumbling just because the JVM has not yet done its job. People talking about "snail Java" often ignore the fact that many JVMs take time to warm up. It's not an issue for server-side applications, which typically run for hours and days. However, the performance of client-side applications is most heavily impacted by the JVM warm-up cycle.
JEdit, a Practical ExampleIf you don't trust vendor benchmarks, check the results yourself. One of the samples that comes with Excelsior JET is a project for compiling jEdit, an open source, cross-platform text editor written in Java. jEdit has many advanced features that make text editing easier, such as syntax highlighting, auto indent, abbreviation expansion, registers, macros, regular expressions, and multiple file search/replace. It's a good example of a full-featured Swing-based application to evaluate GUI response time.
Behind the Performance FiguresAn interesting question is why don't the JIT-powered JVMs hit the performance bar raised by Excelsior JET? Of course, aggressive static optimizations and the removal of bytecode interpretation make Swing work smoothly. However, it seems that the long-running mode of JFCMark should be comfortable for the JIT compilers. Where does the 40% performance win come from? We found the answer unexpectedly when we aimed at further improving Swing performance: the absence of hot methods.
Under the covers, JFC/Swing is quite a complex event-driven system implemented on top of AWT. The implementation consists of several hundred classes which, in turn, use a variety of other core classes. Many thousands of Java methods are executed when, for example, you open a Swing frame. When we obtained the Swing execution profile, it proved to be almost flat. Lots of methods were executed but each of them took hundredths of one percent in total execution time. Only a few methods took more than 1-2%. At this point, we encountered an interesting problem: what should we improve in the absence of clear performance bottlenecks? As you may have guessed, the same problem exists for profile-guided JIT compilers. Instead of a few hot spots to be aggressively optimized, there are plenty of "warm spots" that are left intact. The flat execution profile is an application-specific property that some JVMs cannot effectively manage to achieve top performance.
ConclusionThis article is not about fast and slow JVMs. Rather, it demonstrates that for some Java applications, a JVM with AOT compilation can work faster than JIT-based JVMs. The main lesson we have learned from this study is that one size does not fit all and JFC/Swing is not the only example. One way or another, the Java platform wins and we were happy to make Excelsior JET JVM available to Java/Linux developers.
Reader Feedback: Page 1 of 1
Latest Cloud Developer Stories
Subscribe to the World's Most Powerful Newsletters
Subscribe to Our Rss Feeds & Get Your SYS-CON News Live!
SYS-CON Featured Whitepapers
Most Read This Week